Due to the unusual, not to say unique nature of Monstercolors highly flexible Flexithane coating, it can be found in the most unusual places. Developed for such difficult applications as painting hot air balloons and truck side curtains, it was used recently to embellish the country's largest, loudest tie and is currently adorning the giant spinnaker of a competitor in the round-the-world BT Global Challenge yacht race.
]]>Due to the unusual, not to say unique nature of Monstercolors highly flexible Flexithane coating, it can be found in the most unusual places. Developed for such difficult applications as painting hot air balloons and truck side curtains, it was used recently to embellish the country's largest, loudest tie and is currently adorning the giant spinnaker of a competitor in the round-the-world BT Global Challenge yacht race.
Flexithane is now used widely in the marine sector for use on all types of substrates where a highly flexible paint is needed, it is used on sails, boat covers, rubber inflatables etc .
* A fully flexible paint formulated for PVC, PU and rubber variant fabric
* Semi gloss finish, will not crack or flake off
* No Primer required
* Used for resealing and preventing rubbing strake and mouldings from powdering
* Supplied in 400ml aerosols
* Coverage 1/2 sq m per 400ml
* WARNING – Flexithane must not be used on any hypalon surface.
]]>It can be applied directly over bare metal and most other surfaces and allows painted structures to be exposed to extreme weather conditions within half an hour, without rain spotting, surface blooming or any loss of film performance. Kings Army Industrial Paint is a formulation that effectively changes the rule of industrial finishing, since it dispenses with the need for heated or forced curing.
]]>It can be applied directly over bare metal and most other surfaces and allows painted structures to be exposed to extreme weather conditions within half an hour, without rain spotting, surface blooming or any loss of film performance. Kings Army Industrial Paint is a formulation that effectively changes the rule of industrial finishing, since it dispenses with the need for heated or forced curing.
This paint formula was inspired by the need for an underwater marine finishing system.
Kings Army Industrial Paint is an ultra-high solids, quick drying coating containing high levels of anti-corrosive pigment. Exceptionally easy to apply, it has a heavily structured, thixotropic consistency, giving a film thickness of around 150 microns, without runs or defects. It offers outstanding early moisture resistance, with no loss of performance under highly adverse weather conditions, and will actually dry under water, so there is no need for forced curing.
Each 400ML can comes with a colour coded paint label & a unique fan spray cap actuator.
]]>
Please note there is a minimum order of 5 cans for each colour.
Fluorescent colours are not available!
Please view range of Ral & British Standard Colours By Clicking The Links Below!
]]>Fluorescent colours are not available!
Please view range of Ral & British Standard Colours By Clicking The Links Below!
]]>