White Goods Paint Monstercolors

Baby Blue Ral 240 80 15 Washing Machine Fridge Radiator Spray Paint 400ml

£ 15.99 GBP
£ 15.99 GBP
Skip to product information
White Goods Paint Monstercolors
  • White Goods Paint Monstercolors
  • White Goods Paint Monstercolors
  • White Goods Paint Monstercolors
  • White Goods Paint Monstercolors
  • White Goods Paint Monstercolors
  • White Goods Paint Monstercolors
  • White Goods Paint Monstercolors
  • White Goods Paint Monstercolors
  • White Goods Paint Monstercolors
  • White Goods Paint Monstercolors
  • White Goods Paint Monstercolors
  • White Goods Paint Monstercolors
Baby Blue Ral 240 80 15 Washing Machine Fridge Radiator Spray Paint 400ml

Baby Blue Ral 240 80 15 Washing Machine Fridge Radiator Spray Paint 400ml

£ 15.99 GBP
£ 15.99 GBP
Free

Free Standard Shipping On All Orders

Free Express Shipping On Orders Over £35

 

Monstercolors White Goods Fast drying Gloss acrylic Paint for painting and renovation of fridges, refrigerators, washing machines radiators and other household appliances. Doesn’t become yellow, has good thermal conductivity. Perfect for renovation of outside metal layers of houlsehold appliances. Provides smooth, durable sufrace, you can easly clean.

Quick and convenient way to restore or refurbish 'white goods' enamel paint work
Extremely hard wearing, water resistant finish Long lasting finish - no yellowing or fading Prevents rust and corrosion Ideal for appliance exteriors - fridges, freezers, washing machines, etc. (not suitable areas exposed to heat e.g. ovens & hobs)

Heat resistance up to 100°C
Directly to household appliances
Resistant to moisture and rust
Creates smooth, glossy surface
colour: Baby Blue Ral 240 80 15
Fast drying time: 5-10 minutes !
Touch dry: 15-30 min
Hardened: 16-24 h
Efficiency 1,5 – 2m2 depending on type of surface by one application Hard acrylic film resistant to water and abrasion For indoor and outdoor use Capacity 400 ml

Recommended substrate conditions:
Preparing the substrate is very important action influencing the quality and life of varnish coating. Fundamental principle, which relate to all surfaces prepared to painting is to grind, degrease and dry out. After drying the primed surface should be grinded with fine-grained abrasive paper (e.g. P600).

Method of use:
You can easily cover already painted surface by any other paint. Apply product at temperature about 10-25°C (optimum temperature for good varnish drying). Drying time depends also on air humidity and product density. Painting should be made in well ventilated room. Prior to commencing painting, shake the container for about one minute, which will help mix the varnish by the ball found inside. Perform the test spray. Apply the varnish with few thin layers rather than one thick layer, from the distance of 25-30 centimetres. Following applying each layer, wait a few minutes. Following the completion, clean the nozzle. Put the container upside down, pressing the nozzle for the period of three seconds.

Please note this is not a touch up paint for your appliance this is intended to refurbish (spray entire appliance) 

Health & Safety

Protective Mask and Goggles should be worn when spraying

Spray only in well ventilated area

Important Pre-check: This product is not suitable for high-heat surfaces exposed to direct heat, such as ovens or hobs.

Surface Preparation:
A high-quality finish depends entirely on meticulous preparation.

Degrease (Essential): The surface must be completely free of oil, grease, silicone, and dust. For optimum adhesion, we strongly recommend thoroughly cleaning and degreasing the surface using Monstercolors Degreaser prior to painting.

Dry: Ensure the surface is completely dry before application.

Method of Use:

Conditions: Apply at temperatures between 10–25°C in a well-ventilated room.

Preparation: Shake the container vigorously for at least one minute until you hear the mixing ball rattling clearly.

Test Spray: Always perform a test spray on an inconspicuous area first.

Technique: Hold the can 25–30cm from the surface. Apply the varnish in multiple thin layers, waiting a few minutes between each layer, rather than one thick coat.

After Use: When finished, clean the nozzle by turning the container upside down and pressing the nozzle for 3 seconds.

Format: 400ml Aerosol

Colour: Baby Blue
RAL 240 80 15

Finish: Fast-Drying Gloss (Hard Acrylic Film)

Efficiency/Coverage: 1.5–2m² per can (depending on substrate porosity)

Heat Resistance: Up to 100°C (Not for direct heat sources)

Properties: Extremely hard-wearing, water/abrasion resistant, anti-rust, anti-corrosive, non-yellowing.

Usage: For interior and exterior use on household appliance exteriors (excluding ovens/hobs).

Drying Times (at optimal conditions):

Fast Dry: 5–10 minutes

Touch Dry: 15–30 minutes

Full Hard Cure: 16–24 hours

Safety: Solvent-based. Protective mask and goggles should always be worn when spraying in a well-ventilated area.

You may also like