Monster Matte Spray Paint

1. Safety First:

PPE: Always wear a high-quality respirator mask (A1P2 grade recommended), safety goggles, and solvent-resistant gloves.

Ventilation: Use only in well-ventilated areas or outdoors. Avoid inhaling spray mist or vapors.

Flammability: Keep away from heat, sparks, open flames, and hot surfaces. No smoking during use.

2. Surface Preparation: Ensure the surface is clean, dry, and free from grease, oil, and rust. For best results on smooth plastics or bare metals, we recommend a light sanding with fine-grit paper to improve the mechanical bond.

3. Preparation: Shake the can vigorously for at least 2 minutes after the mixing ball rattles. This ensures the high-solid pigments are perfectly blended for a streak-free finish.

4. Technique: Hold the can 20–25cm from the surface. Apply 2–3 light, even coats using a 50% overlap. Do not attempt to cover the surface in one heavy coat; multiple thin coats provide the most durable "armour" finish.

5. Drying Times: * Touch Dry: 15–20 minutes.

Weatherproof: 30 minutes.

Full Cure: 24 hours.

6. After Use: To prevent nozzle blockages, turn the can upside down and spray for 5 seconds until the spray is clear.

Product Type: High-Solids Quick Air Drying (QAD) Alkyd Enamel.

Finish: Ultra-Matt (<10% Sheen).

Volume: 400ml Aerosol.

Coverage: Approximately 1.5m² – 2.0m² per can.

Properties: UV-stable, crack-resistant, and weatherproof.

Compatibility: Suitable for Metal, Wood, Plastic, Ceramic, Brick, Stone, and Canvas.