Anthracite Grey Ral 7016 Washing Machine Fridge Radiator Renovator Spray Paint

Important Pre-check: This product is not suitable for high-heat surfaces exposed to direct heat, such as ovens or hobs.

Surface Preparation:
A high-quality finish depends entirely on meticulous preparation.

Degrease (Essential): The surface must be completely free of oil, grease, silicone, and dust. For optimum adhesion, we strongly recommend thoroughly cleaning and degreasing the surface using Monstercolors Degreaser prior to painting.

Dry: Ensure the surface is completely dry before application.

Method of Use:

Conditions: Apply at temperatures between 10–25°C in a well-ventilated room.

Preparation: Shake the container vigorously for at least one minute until you hear the mixing ball rattling clearly.

Test Spray: Always perform a test spray on an inconspicuous area first.

Technique: Hold the can 25–30cm from the surface. Apply the varnish in multiple thin layers, waiting a few minutes between each layer, rather than one thick coat.

After Use: When finished, clean the nozzle by turning the container upside down and pressing the nozzle for 3 seconds.

Format: 400ml Aerosol

Colour: Anthracite Grey RAL 7016

Finish: Fast-Drying Gloss (Hard Acrylic Film)

Efficiency/Coverage: 1.5–2m² per can (depending on substrate porosity)

Heat Resistance: Up to 100°C (Not for direct heat sources)

Properties: Extremely hard-wearing, water/abrasion resistant, anti-rust, anti-corrosive, non-yellowing.

Usage: For interior and exterior use on household appliance exteriors (excluding ovens/hobs).

Drying Times (at optimal conditions):

Fast Dry: 5–10 minutes

Touch Dry: 15–30 minutes

Full Hard Cure: 16–24 hours

Safety: Solvent-based. Protective mask and goggles should always be worn when spraying in a well-ventilated area.