Kings Army 250ml Military Brush Or Spray On Paint | Authentic Colours

Surface Preparation: Ensure the surface is clean, dry, and free of contaminants. Lightly abrade metal or plastic surfaces with fine sandpaper to improve mechanical bond. Use a suitable primer for maximum longevity.

Stirring (Important): Stir the paint thoroughly for at least 3 minutes using a flat-edged stirrer to ensure all pigments are fully integrated. Do not shake the tin, as this introduces air bubbles that can ruin a brush finish.

Brush Application: Use a high-quality, soft-bristle brush. Apply in light, even strokes. The high-solids formula provides excellent "levelling" (smoothing out brush marks) as it dries.

Spray Application: For use in a spray gun or airbrush, thin the paint by approximately 10% using Kings Army Xylene Thinners. Perform a test spray to check the flow and atomization.

Drying Times: Touch dry in 2–4 hours. Allow 24 hours for a full industrial cure before heavy handling or assembly.

Solvent Warning: Use ONLY Xylene Solvent Thinners for thinning or cleaning. DO NOT use White Spirit or Turpentine, as these will cause the paint to "curdle" or fail to dry.

Popular Applications:

Scale Modelling: The go-to choice for Amortek, Tamiya, and custom RC builds.

Tactical Gear: Adding realism and protection to Airsoft and Paintball hardware.

Vehicle Restoration: Ideal for detailing engine bays, interiors, and small components on Jeeps and Land Rovers.

Product Type: High-Pigment Industrial Alkyd Enamel.

Volume: 250ml Tin.

Finish: Non-Reflective / Matt (Authentic Military Grade).

Substrates: Metal, Plastic, Resin, Wood, and Diecast.

Thinning Ratio: Up to 10% (Xylene Thinners only).

Coverage: Approximately 2.5 – 3.0 square metres per tin.

Durability: High-opacity, anti-corrosive, and weatherproof.

Historical Accuracy: Precision-matched to authentic military RAL and British Standard (BS) liveries.
Key Features:

45 Authentic Military Colours: From WWII British shades to modern NATO and Panzer Grau.

Superior Detail Control: The 250ml tin is the ideal size for fine brushwork on models, tactical gear, and dioramas.

Industrial Anti-Rust Protection: Packed with high anti-corrosive pigments to provide a weatherproof, long-lasting barrier.

Advanced Water Resistance: Engineered for outdoor durability—perfect for Airsoft gear and outdoor RC environments.

High Solids Formula: Delivers smooth, robust coverage even on rough or uneven surfaces.

Thinning for Spraying: Can be thinned by up to 10% using Kings Army Xylene Thinners for use with spray guns (Do not use White Spirit).

Manufacturing: UK Manufactured.