3 Piece Paint Set 2 Army Spray Paints 1 Matte Lacquer | Original Colours

King's Army Industrial Paint: Application Guide

1. Surface Preparation
Ensure the surface is clean, dry, and free from grease, oil, and rust. For best results, degrease the area thoroughly using a panel wipe or solvent cleaner.

2. Priming Requirements
King’s Army Industrial Paint is self-priming and designed for direct application to most surfaces including wood and previously painted items. However, for non-ferrous metals such as Aluminium, Brass, Copper, or Galvanised Steel, we strongly recommend the use of our Etch Primer to ensure a permanent bond. While a primer is not strictly necessary for every job, its use will always produce a more durable, professional finish.

3. Preparation & Shaking
Shake the can vigorously for at least 2 minutes after the mixing ball begins to rattle. This is critical for industrial Alkyd paints to ensure the high-solid matte pigments are fully agitated for a consistent finish.

4. Application Technique
Hold the can 20–30cm from the surface. Apply 2–3 thin, even coats rather than one heavy coat. The unique fan-spray actuator provides a professional spray-gun pattern; use a 50% overlap on each pass for even coverage.

5. Drying Times

Flash Off: 10–15 minutes between coats.

Weatherproof: Structure can be exposed to rain/harsh conditions after 30 minutes.

Touch Dry: 20–30 minutes.

Hard Dry: 24 hours (full cure).

6. After Use
To prevent nozzle blockages, turn the can upside down and spray for 2 seconds until only clear gas emerges. This clears the valve for future use.

Technical Specifications: King's Army Industrial Paint

Product Type: High-Solids Quick Air Drying (QAD) Alkyd Enamel.

Finish: Full Matt (Low-Reflectivity).

Container Size: 400ml Aerosol.

Coverage: Approximately 1.5m² – 2.0m² per can (depending on surface porosity).

Temperature Resistance: Intermittent heat resistance up to 120°C.

Chemical & Fluid Resistance: Excellent resistance to grease, engine oils, and general grime. Resistant to occasional fuel splashes if wiped clean immediately. (For high-frequency fuel contact, we recommend our Cellulose Military Range).

Key Features:

Anti-Corrosive: Formulated with protective pigments to inhibit rust.

Rapid Cure: Advanced resin system allows for fast handling times and "all-weather" application.

Single-Coat Capability: High-opacity formula provides excellent hiding power.

Environmental Conditions:
Recommended application temperature between 10°C and 25°C. For best results, avoid painting in high humidity or extremely cold conditions.

Storage: Store in a cool, dry place. Shelf life is approximately 2 years when stored correctly.