Cellulose 1k Monstercolors

1K Pro Clear Cellulose Matt Lacquer – High Performance 400ml

£ 17.99 GBP
£ 17.99 GBP £ 17.99 GBP
Skip to product information
Cellulose 1k Monstercolors
  • Cellulose 1k Monstercolors
  • Cellulose 1k Monstercolors
  • Cellulose 1k Monstercolors
  • Cellulose 1k Monstercolors
  • Cellulose 1k Monstercolors
  • Cellulose 1k Monstercolors
1K Pro Clear Cellulose Matt Lacquer – High Performance 400ml

1K Pro Clear Cellulose Matt Lacquer – High Performance 400ml

£ 17.99 GBP
£ 17.99 GBP £ 17.99 GBP
Free

Free Standard Shipping On All Orders

Free Express Shipping On Orders Over £35
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Experience 2K performance with 1K convenience in a sophisticated flat finish. Monster 1K Pro Clear Matt is a high-performance, crystal-clear lacquer system designed for automotive spot repairs and professional finishing. This single-pack formula hardens rapidly to a high-build, UV-stable coating that is both fuel-resistant and non-reflective, ensuring long-term durability and a modern finish.

  • Ultra-Matt Finish: Crystal clear, low-sheen coating with excellent flow and non-sag properties.

  • Professional Grade: Provides 2K-level durability in a ready-to-use 1K aerosol.

  • Rapid Drying: Touch dry in 30–60 minutes; can be air-dried, low-baked, or IR-cured.

  • Chemical Resistance: Fuel and petrol resistant with superior UV stability to prevent fading.

  • Polishing: Easily flatted and can be mechanically polished after 24 hours if required.

  • Safety: Isocyanate-free. Always wear appropriate PPE (mask, gloves, and eye protection) and use in a well-ventilated area.

Preparation: Ensure the basecoat is completely dry and free from dust or grease. Use a tack cloth to wipe the surface immediately before spraying.

Mixing: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling to ensure the matting agents are fully blended.

Environment: Spray in a well-ventilated area at a temperature between 15°C and 25°C for the best flow and finish.

Spraying: Hold the can 20–25 cm from the surface. Apply 2 to 3 even coats with a 5–10 minute flash-off time between each.

Drying: The surface will be touch dry in 30–60 minutes and fully cured after 24 hours.

Maintenance: After use, turn the can upside down and spray for a few seconds to clear the nozzle for future use.

System: Professional 1K Aerosol (Single-pack formula).

Finish: Ultra-Matt / Low-Sheen (Non-reflective).

Clarity: Crystal clear and non-yellowing.

Durability: High-build coating with 2K-level performance.

Resistance: Fuel, petrol, and UV stable to prevent fading.

Safety: Isocyanate-free formula.

Drying: Rapid dry; touch dry in 30–60 minutes.

Compatibility: Designed for automotive spot repairs and professional finishing.

You may also like