Wood Stain & Lacquer Spray Kits | 5-Can Large Project Bundle

Preparation: Ensure the wooden surface is clean, dry, and free from wax or old finishes. Sand to a smooth finish using 180-240 grit sandpaper and remove all dust before spraying.

Staining (Colour Layer): Shake the Wood Stain can for 2 minutes. Apply in light, even passes at a distance of 20–25cm. With four cans available, you can achieve a consistent, deep tone across large surfaces without the risk of running out of pigment.

Protection (Sealing Layer): Once the stain is dry (approx. 30–60 minutes), apply 2–3 light coats of your chosen lacquer (Matte, Satin, or Gloss). Ensure the lacquer is applied evenly to seal the large surface area effectively.

Base Material: Professional-grade Urethane & Alcohol-based pigments.

Aerosol Size: 400ml per can (5-can bundle: 4x Stain, 1x Lacquer).

Drying Time: Touch dry in 10–20 minutes; fully cured in 24 hours.

Coverage: Approximately 12m² total stain coverage (based on 3m² per 400ml can).

Nozzle Type: Adjustable Professional Fan Spray for a smooth, even mist.

Protection: High UV-Fade resistance, waterproof, and mould-resistant.

Origin: Proudly manufactured in the United Kingdom.