Monstercolors PVC matt finish paint offers less than a 10% sheen sheen level, and is widely used to re-colour, regenerate and re-touch tired or damaged PVC doors, window frames, facias, drainpipes and various other plastic substrates, found in the marine and automotive industry as well as plastic garden furniture and arts n crafts.
Application: PVC Paint, should be applied in multiple thin layers, building up to a final thicker finish, A minimum 10 minutes between coats is recommended (dependant on conditions) in order to achieve a quality finish. Coverage Each 400ml Can will cover around ½ of your average size PVC door with a good finish, please note this is not exact as door sizes and make up of doors are different, i.e. multiple panel, ridges, glass etc. No primer is required with PVC paint. The surface can be keyed with a slight rub of a scotch pad.
Cleaning: Ensure surfaces to be coated are dry and must be cleaned using suitable cleaners in order to remove all traces of contaminants.
Health & Safety suitable respiratory equipment should be worn when spraying.
After use: Turn can upside down and spray for a 5 second burst, this will clear the valve and nozzle.
Swatch colours are approximate and may vary depending on device settings.